Industrial Coatings
Durol ES5400-2V – Alkyd Top Coat
DUROL ES5400-2V are single-component enamels based on alkyd resins, fillers, special additives, driers, solvents, and coloring pigments. They offer good resistance to water and splashes of petroleum products (mineral oils, gasoline, diesel, hydrocarbons, etc.), good mechanical properties, strong adhesion to the substrate, good weather and impact resistance, good leveling, and excellent covering power.
Downloads
Product information
Monocomponent product
Gloss: Semi-glossy and matt
Solids volume: 45-47 vol %
VOC: 470 g/L
Hard Dry: 24 hours
Recoatable: min 24 hours
Processing
Air spray
Thinner: D551-1, D553
Quantity: 5-10 vol.%
Nozzle: 1.8-2.5 mm
Flow pressure: 3-5 atm
Dry film thickness:
35-40 μm
Airless spray
Thinner: D551-1, D553
Quantity: 3-10 vol.%
Nozzle: 0.011’’- 0.017’’
Flow pressure: 150-170 bar
Dry film thickness:
35-40 μm
Brushing/Rolling
Thinner: D551-1, D553
Quantity: 3-10 vol.%
Dry film thickness: –
Clean all equipament immediately after application/use with thinner D551-1 or cleaning solvent S 300.
Packaging &
valability
